1.easy to use
2.easy to read
1. To begin testing, open the sealed pouch by tearing along the notch. Remove the test form the pouch.
2. Lay the cassette flat on a clean, dry, nonabsorbent surface, draw one drop (about 30ul)whole blood into the sample pad.
3. Then draw one drop of buffer into the sample well as well.
4. Wait for colored bands to appear. Read results within 15 minutes. Do not read results after 20 minutes
Interpretation of results:
Negative: Only one pink band appears on test region of the Cassette. This indicates that there is no detectable anti-TP in the whole blood.
Positive: Two pink bands appear on test region of the Cassette. This indicates that the specimen contains detectable amount of anti-TP.
Invalid: If without colored band appears on test region, this is an indication of a possible error in performing the test. The test should be repeated using a new device.
1, Must use fresh specimen.
2, Use it before expiry date.
3, The package of kit should not be opened until it reaches the room temperature if it taken out from the refrigerator.
1, The test is for in-vitro diagnostic use only.
2, The test is qualitative filter detection, it cannot be used as the final test for blood donor.
Storage and stability:
The test kit can be stored at room temperature (2 to 30°C) in the sealed pouch to the date of expiration. The test kit should be kept away from direct sunlight, moisture and heat
- Lead Time: 3 - 7 days
- Central/South America
- Eastern Europe
- Mid East/Africa
- North America
- Western Europe